To further assist you in choosing the correct product for your application, Quadrant makes available the following pieces of literature:
To view the printer-friendly version, you must have Adobe Reader on your system.
Products and Applications Guide
This full color, 44 page booklet profiles the broadest and most progressive line of plastic machining stock available anywhere in the world. Physical property data and applications are reviewed for a range of machinable materials from nylon (PA) up through Celazole (PBI). This guide includes information about materials like Nylatron® GSM and NSM, Acetron® GP, Ertalyte® PET-P and TX, Fluorosint®, Torlon®, Duratron®, Techtron® PPS and the whole Semitron® ESd line of static dissipative materials. If you design equipment or want the latest information about machinable plastics, you need this guide.
Products and Applications Guide - A guide to selection and performance of Polyolefin materials
This full color brochure is an in-depth guide to the broad line of Polyolefin materials and their diverse applications from cutting boards to wear resistant bearing materials. Physical property data and applications are reviewed for a range of world renowned materials such as Sanalite®, Proteus® and the TIVAR® family of products. If you are looking for an alternative to nylon our Polyolefin line offers FDA compliant, UV resistant and electrically conductive materials for a diverse field of applications.
Design and Fabrication Reference Guide
This 44 page booklet is the best resource available for machinable plastic fabrication information. Design engineers and cutting edge fabricators have relied on Quadrant's technical resources for decades. This all new guide profiles the meaning of physical property testing, bearing, sheave and roller design, as well as a comprehensive gear design worksheet. Charts summarizing tool geometries and speeds are provided for all of Quadrant's materials.
Quadrant Global Business Profile
Our best successes come from close working relationships with our customers - but not just on solving application problems with our materials' properties. The more we understand about what's important to your company, what it takes to compete, what determines your success and value with your customers, the better we can apply the right services and product technology for machined components for your equipment.
QuickSilver® Truck Liners Brochure
QuickSilver high performance dump truck liners are designed to clean-out and clean-up of some of the toughest materials including hot asphalt in the very worst conditions. From winter freeze to summer heat, QuickSilver truck liners release sticky materials, meaning faster load release, less equipment damage, reduced chance of tip-over, less wear on hoists, minimal clean-up and reduced downtime. On-road, off-road or heavy equipment, we've got a QuickSilver liner for you.
Advanced Engineering for Chemical Processing Equipment - A guide to materials that meet the need for increased efficiency and greater up time.
Quadrant has a proven and growing portfolio of engineering materials for components that can face the challenges in pump, valve and rotating equipment. Reduced weight and power requirements, chemical exposure, increased meantime between rebuild, dimensional stability and temperature capability all have an effect on equipment productivity. This guide helps simplify the material selection challenge by grouping materials by their application area, chemical service, temperature capability and relative cost.
Advanced Engineering Plastics for Life Sciences Applications - A broad range of materials that offer design flexibility and speed development.
This brochure showcases Quadrant's Life Science Grade materials designed specifically for Medical, Pharmaceautical and Biotechnology applications. It includes comparative data in chemical, sterilization and radiation environments to simplify the decision making process. The key benefits of our Life Science Grades are their performance, biocompatibility, full traceability, global availability and quality assurance.
Engineering Plastics for Food Processing and Packaging Equipment - A guide to materials that meet the industry's need for more and faster production.
Quadrant's specialized food brochure is 19 informative pages highlighting our wide array of FDA, 3A Dairy and USDA compliant materials. Proteus, Polypropylene, TIVAR 1000, Acetron GP, Nylatron, MC 907, Ketron 1000 PEEK and Ertalyte are all described in detail. Case studies, application information and physical property data is depicted for a broad range of materials where temperature, chemical resistance, dimensional stability and wear resistance are compared in an easy to understand and differentiate format.
***NEW*** Fluorosint® PTFE Family of Advanced Materials
Quadrant developed the Fluorosint range of enhanced PTFE materials to fill the performance gaps where unfilled and low-tech, filled PTFE based polymers under perform. Each Fluorosint grade was specifically developed to excel in demanding bearing and seal applications. While each posses the chemical resistance and compliance of PTFE, individual they boast special benefits that give the designer clear performance advantages. This guide is an outstanding tool for learning more about Fluorosint and how to determine the right grade for your application.
Advanced Engineering Plastics for Semiconductor and Electronics Manufacturing Equipment - A guide to materials that boost productivity, consistence and quality.
More parts, fewer defects and lower product cost per unit are some of the challenges for semicon engineering teams. There are new choices for these new challenges. This guide is designed to help you find the new material solution needed for today's demand for higher productivity.
To further assist you in choosing the correct product for your application, Quadrant Engineering Plastics makes available the following pieces of literature:
Armor-X® Protects Equipment, Flooring Flyer
Protect equipment and surfaces with Armor-X. Armor-X's non-marring, cushioned surface shields critical surfaces and heavy, expensive parts and equipment, including stainless steel, from gouges and scratches. From work surfaces to flooring, Armor-X helps protect your investment.
Ketron® 1000 IM PEEK Product Flyer
Proteus® LSG HS PP Product Flyer
Techtron® Family of Advanced Materials Flyer
TIVAR® Ceram P Handles Intense Sliding Abrasion Applications Flyer
Reduce maintenance down time, extend equipment service life and reduce replacement part cost with TIVAR Ceram P from Poly Hi Solidur. Developed for severe service conditions, TIVAR Ceram P outwears and outperforms other materials in highly abrasive industrial environments.
TIVAR® H.O.T. Flyer
Developed specifically to excel in chemical and thermocycling environments with temperatures ranging up to 275 F, TIVAR H.O.T is fast becoming the material of choice for baking, food processing & packaging, conveyor manufacturing, grain processing and many other major industries.
|SDS Number||Product Identification|
|807||Acetron GP, Black|
|901||Acetron Products, Natural and Black|
|36||Black Homopolymer Polypropylene|
|1000||Delrin AF, AF Blend, 588 AF|
|1501||Duratron (Ultem), Glass Reinforced|
|1500||Duratron (Ultem), Natural|
|2655||Duratron 7000, Duratron 7015G, Duratron 7040G|
|2700||Duratron CU60 PBI (Celazole)|
|2101||Duratron PPSU (Radel R)|
|1800||Duratron T4203 PAI (Torlon 4203)|
|1802||Duratron T4275 PAI (Torlon 4275)|
|1801||Duratron T4301 PAI (Torlon 4301)|
|1811||Duratron T4435 PAI (Torlon 4435)|
|1810||Duratron T4501 PAI (Torlon 4501)|
|1808||Duratron T4503 PAI (Torlon 4503)|
|1807||Duratron T4540 PAI (Torlon 4540)|
|1803||Duratron T5030 PAI (Torlon 4XG)|
|1804||Duratron T5530 PAI (Torlon 5530)|
|1806||Duratron T7130 PAI (Torlon 4XCF)|
|1809||Duratron T7530 PAI (Torlon 7530)|
|1100||Ertalyte PET-P, Natural and Black|
|1603||Ketron CA30 PEEK, Ketron CM HPV PEEK and Ketron CM 1030 HT|
|1655||Ketron CC LSG PEEK|
|1601||Ketron CM 1331 HT|
|1602||Ketron GF30 PEEK and Ketron CM GF30 Peek|
|1604||Ketron HPV PEEK, Ketron CM HPV PEEK and Ketron 1331 PEEK|
|1600||Ketron PEEK 1000|
|1652||Ketron PEEK CA-30 LSG|
|1651||Ketron PEEK GF-30 LSG|
|1653||Ketron PEEK LSG|
|1654||Ketron PEEK CLASSIX LSG|
|17||Linear High Density Polyethylene - Sanalite|
|21||Natural Homopolymer Polypropylene - Sanalite|
|201||Nylatron GS-HS (heat stabilized)|
|400||Nylatron GSM and GSM-P|
|401||Nylatron GSM, Blue|
|701||Nylatron MC 703 XL|
|301||Nylatron MC-903 Blue|
|306||Nylatron MC-907 Black|
|307||Nylatron MC-907 Yellow|
|305||Nylatron MC-907-HS (heat stabilized), Black|
|302||Nylatron MC 907 Natural and Nylatron LFG|
|300||Nylatron MC-901 Blue|
|304||Nylatron MC-904 Blue & Nylatron MC-904-P Blue|
|1102||PBT, Natural and Black|
|23||Proteus White Homopolymer|
|1703||Quadrant BG PPS|
|1605||Quadrant GF 40 PPS|
|100||Quadrant Nylon 101|
|2003||Quadrant Nylon Type 11|
|1900||Quadrant PC 1000 Polycarbonate|
|1504||Quadrant R5500 XL LSG PPSU|
|2004||Quadrant Nylon Type 12|
|2000||Quadrant Nylon Type 6|
|2002||Quadrant Nylon Type 6/12|
|2800||Semitron CMP LL5|
|2801||Semitron CMP, XL-20|
|804||Semitron ESd 225|
|1103||Semitron ESd 300 PET|
|1502||Semitron ESD 410C|
|2150||Semitron ESd 420 and Semitron ESd 420V|
|1607||Semitron ESd 480|
|1403||Semitron ESd 500|
|1805||Semitron ESd 520HR|
|1404||Semitron MDS 100|
|1702||Techtron PPS SM|
|32||TIVAR 88 Anti Static|
|33||TIVAR 88-2 Anti Static|
|2||TIVAR Anti-Static, Tivar Black|
|9||TIVAR Ceram P|
|13||TIVAR Oil Filled|
|2100||Udel Polysulfone, Unfilled|