Loader
Home »   ...  » Products » Engineering Plastics » Case study : TIVAR® 1000

Case study : TIVAR® 1000

UHMW-PE + SBR (styrene-butadiene rubber):  Rubber Back Sheet developing process

There is many cases that when Attaching lining material to small flection part, thin rubber back sheet is required. UHMW-PE can’t be attached with bond to opponent material. UHMW-PE is required with bolt when it lined. Lining UHM-PE with bolt sometime caused non-good sliding property in consequence of adherence on holed bolt part.

We developed composite material by bonding UHMW-PE and SBR. SBR can be attached to opponent material by bond. Weak point UHMW-PE, CLTE can be refrained from this composite structure as little as possible.


Application:Screw Feder
Quantity:25 pcs
Liner:TIVAR® 1000 (2mm) + SBR (1mm) x 900 x 1800
Bulk Material: feedstuff of cow
Substrate:Stainless
Problem:flow, adherence
Date Installed:  2010

The Challenge

Feedstuff laid down on a trough and vent

Quadrant’s solution

Providing Semi finished parts, Install time could be shorten. Fulfilled Customized size required.

Important: Most plastics will ignite and sustain flame under certain conditions. Caution is urged where any material may be exposed to open flame or heat generating equipment. Use Material Safety Data Sheets to determine auto-ignition and flashpoint temperatures of material or consult Quadrant Engineering Plastic Products. WARRANTY: Characteristics and applications for products are shown for information only and should not be viewed as recommendations for use or fitness for any particular purpose. TIVAR® and SystemTIVAR® are registered trademarks of Quadrant Engineering Plastic Products, Inc.

Case Studies

Blended Coal

Drop-in TIVAR® 88-2 liners solve coal bunker flow problems at coke plant.

Open

Lignite Coal

TIVAR® 88-2 liners improve bottom dump railcar operating efficiency.

Open

Crushed Stone

TIVAR® railcar end wall liners enhance aggregate flow and reduce costs.

Open

Limestone

Major cement plant solves limestone flow problem with TIVAR® 88.

Open

Sub-Bituminous Coal

TIVAR® 88-2 liners eliminate flyash build-up in wet precipitator system.

Open