CHEMPLAST® Lined Steel Systems
We proudly offer reliable, corrosion resistant piping products (spools, fittings, valves, bellows etc.) for the chemical, petrochemical, pharmaceutical, power, refining, pulp and paper, water-treatment and metal processing industries:
- Chemplast® pipe liners are chemically inert to all known industrial chemicals;
- The product offers outstanding corrosion resistance;
- Low friction, non-stick, non-flammable & non-toxic;
- Wide temperature range (-29°C to +232°C). PTFE is recommended for continuous temperatures from -129°C up to 232°C;
- Exhibits excellent permeation resistance;
- Zero water absorption;
- Minimum permeability in pipe liners.
QUALITY ASSURANCE & CONTROL
Quadrant Chemplast has an independent Quality Assurance/Control Department. Our QA department takes full charge of all pre-manufacturing and manufacturing QC inspection processes. All steel supplied by our suppliers is inspected on arrival, material test certificates are available for all steel supplied, all steel shall conform to EN 10204 : 3.1 or BS DIN 50 049 : 3.1 certification.
Quadrant Chemplast liners are inspected and tested by our QA/QC department pre-lining. Mechanical properties are tested in-house by our QC inspectors, and shall always conform to ASTM F1545-97(08).
The QA Department creates a Quality Control Plan (QCP) for every order received, this QCP is a map of all processes that the lined steel fittings or spools will undergo, there are inspection interventions marked on this QCP to show the HOLD Points for inspection by QC, customer or third party. No job is started without a QCP.
All our lined steel pipes and fittings are marked with our internal unique number for traceability. This number is hard stamped on the Flange Face. From this number we can trace all material certificates for both steel and lining used. All other Quality Tests are performed on a lined product are traceable from this number. No lined pipe or fitting leave our premises without traceability.
All our lined steel fittings and spools are hydrostatically pressure tested to 29 Bar at ambient temperature, and electrostatically tested @10 kV. A certificate of conformance, or pressure test certificate is issued on request.
PRODUCT IS SHIPPED IN COMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS REGARDING CLASSIFICATION, PACKAGING, SHIPPING AND LABELING.
Stainless Steel Braided Hoses
We supply stainless steel PTFE lined braided hoses PTFE lined S/S 304 BS 4504/10 S/S Flanges, and PTFE convoluted, black shrink-wrap wire-reinforced hoses in the following sizes: 25/40/50/880/100/150 NB.
keyboard_arrow_downASTM F 1545-97 (2009) : Standard Specification for Plastic Lined Ferrous Metal Pipe, Fittings & Flanges:
This standard covers plastic lined steel pipe and fittings in terms of material workmanship, dimensions, test methods and workings;
Abbr. Full Name ETFE Ethylene Tetra Fluoro Ethylene PFA Perfluorinated Vinyl Ether FEP Fluoro Ethylene Propylene PVDF Poly Vinylidene Fluoride PTFE Poly Tetra Fluoro Ethyelene PE Poly Ethylene PP Poly Propylene
Abbr. Temp. ETFE -29 to 149ºC PFA -29 to 260ºC FEP -29 to 149ºC PVDF 25 to 254ºC PTFE -29 to 260ºC PE -50 to 80ºC PP -20 to 107ºC
DN25 3.43mm DN40 3.80mm DN50 4.06mm DN80 4.06mm DN100 4.20mm DN160 4.20mm DN200 7.5mm