Symalit® Fluoroplastics Materials

Symalit® ECTFE 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
	A	A	A	A			tech. pure; Data valid for lining applications

Symalit® FEP 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
	A	A	A	A	A	A	tech. pure; Data valid for lining applications

Symalit® PFA 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
	A	A	A	A	A	A	tech. pure; Data valid for lining applications

Symalit® PVDF 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
UD	A	A	A	A			tech. pure; Data valid for lining applications

Symalit® ECTFE 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
	A	A	A				all aqueous; Data valid for lining applications

Symalit® FEP 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
	A	A	A	A	A	A	all aqueous; Data valid for lining applications

Symalit® PFA 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
	A	A	A	A	A	A	all aqueous; Data valid for lining applications

Symalit® PVDF 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
UD	A	A					all aqueous; Data valid for lining applications

Symalit® ECTFE 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
100	A	A	A				Data valid for lining applications

Symalit® FEP 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
100	A	A	A	A	A	A	Data valid for lining applications

Symalit® PFA 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
100	A	A	A	A	A	A	Data valid for lining applications

Symalit® PVDF 1000 linings
Concentration	RT	50 °C	75 °C	100 °C	125 °C	150 °C	Remarks
100	A	A	A	A	A		Data valid for lining applications

Legend

A: Material is resistant

B: Change of properties can occur

C: Material is not resistant due to change of properties

The ratings given here are intended as a guide only and not as an alternative to actual testing. Therefore in practice, it is strongly recommended to carry out preliminary tests on a prototype under actual service conditions, to evaluate the final suitability of the selected plastics material for your application.

Quadrant