Certifications

2.1 Certificate of compliance with the order

• Document in which the manufacturer certifies that the products supplied are in compliance with the Quality Assurance Specifications and with the Specifications of the order, without mention of any test results.

2.2 Test report

• Document in which the manufacturer certifies that the products supplied are in compliance with the Quality Assurance Specifications and with the Specifications of the order and in which he supplies test results.
• Inspection and testing are carried out by the manufacturer in acc. with his own procedures.
• The products inspected and tested need not necessarily be the products actually supplied.

3.1 Inspection certificate

• Document issued on the basis of inspection and tests carried out according to the technical requirements specified in the order or the official regulations and the corresponding technical rules.
• The tests shall be carried out, before delivery, on the products supplied. The inspection unit is specified in the product standard, the official regulations and corresponding technical rules or in the order.
• Document is issued by the department independent of the manufacturing department and validated by an authorized representative of the staff independent of the manufacturing department.
• An administrative fee of Euro 50 is charged to issue a 3.1 certificate.

Quadrant EPP has also earned accreditations that prove our capacity and technical competence within specific industry sectors

• Our Italian processes have been certified Registro Italiano Navale (RINA) for cable sheaves in Nylatron^® Monocast GSM.

Quadrant EPP is an approved vendor to the following manufacturers:

• Airbus
• Alinea
• Bosch Rexroth
• E.ON
• Krones
• RWE
• Siemens
• Tetrapak