You inspire... we materialize®

Read more

You inspire... we materialize®

Read more

You inspire... we materialize®

Read more

You inspire... we materialize®

Read more

Ertalyte® PET-P

Ertalyte® PET-P

Ertalyte® PET-P

Product Overview

  • Good for both wet and dry environments
  • High strength and rigidity -- ideal for close tolerance parts
  • Excellent stain resistance
  • Good wear resistance and excellent dimensional stability
  • Better resistance to acids than nylon or acetal
  • Ertalyte® Family of Advanced Materials Flyer

Ertalyte® PET-P

Ertalyte® is an unreinforced, semi-crystalline thermoplastic polyester based on polyethylene terephthalate (PET-P). It is manufactured from proprietary resin grades made by Quadrant. Only Quadrant can offer Ertalyte®. It is characterized as having the best dimensional stability coupled with excellent wear resistance, a low coefficient of friction, high strength, and resistance to moderately acidic solutions. Ertalyte®'s properties make it especially suitable for the manufacture of precision mechanical parts which are capable of sustaining high loads and enduring wear conditions. Ertalyte®'s continuous service temperature is 210°F (100°C) and its melting point is almost 150°F higher than acetals. It retains significantly more of its original strength up to 180°F (85°C) than nylon or acetal (See Figure 9).

In addition, Ertalyte® PET-P offers good chemical and abrasion resistance. Its low moisture absorption enables mechanical and electrical properties to remain virtually unaffected by moisture (See Figure 11). Ertalyte® PET-P can be machined to precise detail on standard metal working equipment.

Ertalyte® is FDA compliant in natural and black. Natural Ertalyte® is also USDA, 3A-Dairy and Canada AG compliant. Ertalyte® is an excellent candidate for parts used in the food processing and equipment industries.

 

 »Does your application require better wear properties, or higher dimensional stability?«

Consider Ertalyte® TX. This variation contains a solid lubricant which gives it a lower coefficient of friction. Ertalyte TX will last nearly two times as long as the Acetron® AF Blend. For more information click on the tab above.

 

 

  • Manifolds

    Process and test equipment manifolds machined from Ertalyte® offer improved dimensional stability combined with superior stain and chemical resistance. (Prior materials: Aluminum, Acetal)

  • Food Equipment Components

    Many parts on food manufacturing and processing equipment are machined from Ertalyte® — like this hamburger forming die component which meets stringent tolerance requirements and can be easily sanitized using clean-in-place chemicals. (Prior material: Aluminum)

  • Carousel, Filter Track, Locating Disk and Ring

    Its rigidity and clean hygienic appearance — in addition to dimensional stability and resistance to dilute hydrochloric acid-made Ertalyte® the ideal choice for various components on pharmaceutical test equipment. (Prior material: Nylon, UHMW-PE)

Ertalyte® TX

Ertalyte® TX is an internally lubricated thermoplastic polyester providing enhanced wear and inertness over general purpose nylon(PA) and acetal(POM) products. Containing uniformly dispersed solid lubricant, Ertalyte® TX provides a lower wear rate and coefficient of friction than unmodified polyesters like PET or PBT and even internally lubricated materials like Delrin® AF blend.

Ertalyte® TX excels under both high pressure and velocity conditions. It is also ideally suited for applications involving soft metal and plastic mating surfaces.  Ertalyte® TX is also FDA, USDA and 3A-Dairy compliant.

 

 

 

  • Distribution Valves

    Ertalyte® TX excels under both high pressure and velocity conditions. It is also ideally suited for applications involving soft metal and plastic mating surfaces. The distribution valves in this food packing machinery are made of KETRON® PEEK-1000 and ERTALYTE TX. These materials are replacing stainless steel parts which caused too much wear of the housing and consequently unacceptable maintenance costs. The clearance between distribution shaft and housing must be kept as tight as possible to avoid leakage. (Prior material: Stainless Steel)

  • Ertalyte Offers Better Strength in Higher Temps

  • Wear Rate (k-factor)

  • Stability of Engineering Materials

Because it is more rigid and offers greater thermal performance than nylon and acetal, Ertalyte machines differently. For best results, please request a copy of Quadrant's design and fabrication guideline for Ertalyte® PET-P. Ertalyte® and other polyesters have less resistance to hot water than Acetron® GP acetal.

2007-2014 © the Quadrant group of companies. All rights reserved.

Contact