You inspire... we materialize®

Read more

You inspire... we materialize®

Read more

You inspire... we materialize®

Read more

You inspire... we materialize®

Read more

Home »   ... »Products » Machinable Plastics » Advanced 325 - 425 °F » Semitron® Semiconductor Grade Products

Semitron® Semiconductor Grade Products

Semitron® Semiconductor Grade Products

Semitron® Semiconductor Grade Products

Product Overview

The Semitron® Semiconductor Grade products were developed to help designers and users optimize the performance of device manufacturing equipment.  In addition to device manufacture, many of these materials are ideal for specific environments where wear-resistance, chemical-resistance and the management of static electricity are required.

Two groups of products have been developed.  One, well suited for device handling and test applications, and a second for next-generation CMP use.

Click here to learn about our new Semiconductor grade.

Family of Advanced Materials Flyer

Advanced Polymer Material

  • Product Overview

    Semitron® MP 370 offers more choices in the design and manufacture of precision test sockets for the semiconductor manufacture industry.  While maintaining the same excellent moisture absorption and high thermal resistance of PEEK, Semitron® MP 370 provides greater strength and dimensional stability.  This custom formulation allows finer and cleaner detail due to it's excellent machinability.

    • Very low moisture absorption
    • Exceptional machinability - very small holes and tight hole patterns are possible
    • Strength and stiffness that exceed unfilled PEEK materials
    • Low internal stresses and no "soft center" problems associated with injection molded blanks
  • Product Documentation

  • Product Overview

    Semitron® MDS 100 has a remarkable combination of strength, stiffness and stability.  It was developed to be used in uncontrolled application environments or where a high level of precision is required.  It is an ideal choice for semiconductor test sockets, nests and fixtures in test and package equipment.

    • Moisture absorption of .10% at 24 hrs. (per ASTM D570).
    • Thermal performance to 410°F (210°C)
    • Flexural modulus > 1,400,000 psi
  • Product Documentation

Static Dissipative Acetal

  • Product Overview

    Semitron® ESd 225 is ideal for fixturing used in the manufacturing of hard disk drives or for handling in-process silicon wafers. It is tan in color.

    • Surface resistivity: 109 - 1010 ohms/sq.
    • Thermal performance to 225°F (107°C)
    • Good wear resistance
  • Product Documentation

  • Proven Applications

    Wafer Combs

    Wafer combs made of Semitron® ESd 225 eliminate transfer equipment discharge problems that cause millions of dollars in lost wafers every year. (Prior materials: Nylon, Standard Acetal)

Static Dissipative PEI

  • Product Overview

    Semitron® ESd 410c is ideal for handling integrated circuits through the test handler environment. It is black in color and opaque.

    • Surface resistivity: 104 - 106 ohms/sq.
    • Thermal performance to 410°F (210°C)
    • Low stress for tight tolerance machining
    • High strength and stiffness
  • Product Documentation

  • Proven Applications

    Handling Trays

    Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)

  • Product Overview

    Semitron® ESd 420 is the only, truly dissipative plastic product for use in high temperature applications.

    • Surface resistivity: 106 - 109 ohms/sq.
    • Thermal performance
  • Product Documentation

  • Product Overview

    Semitron® ESd 420V offers dissipative performance of 106 - 109 ohms/sq. over it's full temperature performance range.  It is a stiff, high strength material that is not subject to dimensional change as a result of exposure to moisture.  Semitron® ESd 420V is a cost effective alternative for applications that do not require the thermal performance of ultra-high performance materials.

  • Product Documentation

Static Dissipative PEEK

  • Product Overview

    This PEEK based static dissipative material provides a dissipative range of 106 - 109 ohms/sq.  Semitron® ESd 480 is very dimensionally stable, making it ideal for critical test fixture applications.  Its exceptional chemical resistance makes it well suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.  Like all Quadrant Semitron® ESd materials, Semitron ESd480 is not subject to dielectric breakdown.  (Refer to Engineering Notes on this page.)

  • Product Documentation

  • Product Overview

    A slightly higher resistivity PEEK based material that offers similar physical properties as Semitron ESd 480.

    • Surface resistivity: 1010 - 1012 ohms/sq
  • Product Documentation

Static Dissipative PTFE

  • Product Overview

    Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR offers an excellent combination of low frictional properties and dimensional stability. Semitron® ESd 500HR should be considered wherever PTFE is used. It is ideal for applications where controlled bleed off of static charges is critical. It is white in color.

    • Surface resistivity: 1010 - 1012 ohms/sq
    • Thermal performance to 500°F (260°C)
    • Thermally insulative
    • Very low coefficient of friction
    • Broad chemical resistance
  • Product Documentation

  • Proven Applications

    Inserts

    Static dissipative inserts machined from Semitron® ESd 500HR plate reduce damage to sensitive devices due to static discharge. (Prior material: Ceramic)

Static Dissipative Machining Stock

  • Product Overview

    Semitron® ESd 520HR has an industry first combination of electrostatic dissipation (ESd), high strength and heat resistance. This new ESd material is ideal for making nests, sockets and contactors for test equipment and other device handling components. The key features of 520HR are its unique ability to resist dielectric breakdown at high voltages (>100V). The graph below demonstrates the electrical performance of plastic materials commonly used in automated test handlers. Typical carbon fiber enhanced products become irreversibly more conductive when exposed to even moderate voltage.

    Only Semitron® ESd 520HR maintains its performance throughout the voltage range, while offering the mechanical performance needed to excel in demanding applications.

    • Surface resistivity: 1010 - 1012 ohms/sq
    Static Dissipation (Surface Resistivity, ohms/sq.)
    Semitron® ESd 2251010 - 1012
    Semitron® ESd 410C104 - 106
    Semitron® ESd 420106 - 109
    Semitron® ESd 500HR1010 - 1012
    Semitron® ESd 520HR1010 - 1012
  • Product Documentation

  • Proven Applications

    IC Device Testing Fixtures

    A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads. The high mechanical strength of Semitron® ESd 520HR results in longer useful life of the test heads and, thus, greater units (tested) per hour.

    Semitron ESd 520HR is the first product to reliably meet all physical performance needs for test nests, sockets and contactors, combined with ESd performance. It is both ESd (surface resistivity of 1010 to 1012 ohms/square) and has sufficient resistance to minimize the risk of 'leakage' (cross-talk). Also significant is the ability of Semitron ESd 520HR to retain its surface resistivity at electrical forces greater than 100 volts.

Semitron® CMP Materials

The Semitron® CMP product line was developed to give new tool designers and forward-thinking end users an opportunity to increase the number of devices successfully produced per wafer while decreasing the cost of consumables per device.  This is achieved by increasing the service life of the retaining ring.

  • Product Overview

    CMP Optimized PET-P
    Semitron® CMP LL5 is one of the next-generation materials developed to significantly increase the performance possible from CMP tools. It is white in color and opaque.

    • Long life material - up to 5x PPS
    • Ideal for CMP applications up to 140°F (60°C)
    • Best performance in oxide chemistries - up to 8x PPS
  • Product Documentation

  • Product Overview

    CMP Optimized PAI

    Semitron® CMP XL20 is the premium CMP material developed by Quadrant's Research & Development Team.  It is charcoal/black in color and opaque.

    • Significantly lower cost per wafer
    • Outperforms PPS up to 20x in most processes
    • High strength and stiffness promotes fewer edge defects and better uniformity
  • Product Documentation

  • Table 4.5

  • Surface Resistivity

It is important to know how applied voltage affects the resistance of a material. Some materials exhibit high resistance at low voltages, but when subjected to harsher conditions, they can fall. This is due to dielectric breakdown and is irreversible. This chart illustrates the effect of sequential applications of 100 through 1,000 volts, then a return to 100 volts to determine the hysteresis. Since static electricity can be several thousand volts, consistent performance across the voltage range must be considered.

Some materials are very inconsistent and vary on the "grain" of machining. One pair of lines illustrate the typical variation from side to side (A to B) of the same sample. This example demonstrates the need for consistent behavior in service.

2007-2014 © the Quadrant group of companies. All rights reserved.

Contact